Apparatus Bays and Municipal Buildings

Superior Fire Station Floor Coatings From Delano, MN

When the tones drop, crews cross the apparatus bay at a run. We coat station floors with slip-resistant systems, safety striping, and department logos, so the bay stays safe, bright, and easy to hose down.

Apparatus Bay Floors That Hold Footing at Speed

Fire station floor coatings seal apparatus bay concrete under a slip-resistant epoxy and polyaspartic system. Water, salt, and fluids stay on top, and crews keep steady footing when they move fast. They also add striping, color zones, and department logos to the bay.

The tones go off, and everyone moves at once. Boots hit the bay floor on the way to the trucks, sometimes across concrete still wet from the last wash. At that moment, traction is not a design choice. It is a safety need.

Our crews coat fire stations and city buildings across the metro. Think Bloomington, Eagan, and Burnsville. Every department deals with heavy trucks, constant washing, and winter salt that rides in on every return.

  • Grit at drains, wash zones, and cab paths
  • Striping for apparatus parking and walkways
  • Department patch or shield in the floor
  • Phased floor work that keeps apparatus in service
Get a Free Estimate 

Tell us how many bays your station has. We will plan the work so your apparatus stays ready to respond.

This field is for validation purposes and should be left unchanged.
Address(Required)
Wet concrete finishing worker at construction site, wearing safety gear and kneeling on cement.

What an Apparatus Bay Puts a Floor Through

Few commercial floors take the load of a fire station bay. Engines and ladder trucks park in the same spots day after day.

The bay floor faces more than most slabs.

  • Truck tires come back hot from runs.
  • Hoses drain across the concrete after training.
  • Crews scrub the station floor after every dirty call.

Through a Minnesota winter, salt brine freezes in the surface pores and breaks the top layer apart. An apparatus bay floor coating seals the concrete so water, salt, and fluids stay on top.

Fire Station Epoxy Flooring With Grip Built In

Slip resistance comes standard with our commercial systems. In an apparatus bay, we add grit where water collects, like the areas around drains, wash zones, and the path from the gear room to the cab doors.

Quartz and chip broadcasts add texture as well. They give boots something to bite into without becoming hard to clean. Fire station epoxy flooring should support fast movement, so we tune the grip zone by zone.

The coating also brightens the bay. Light bounces off a finished floor, so crews spot tools and small leaks under the trucks faster.

Gear and Decon

Coated Floors for Gear Rooms and Decon Areas

Turnout gear carries soot back from fires. Departments work hard to contain it. A sealed, non-porous floor washes down fast and leaves fewer places for residue to settle.

Decon zones see the most water in the building, so we plan them with extra traction. We can coat hose towers, mechanic bays, day rooms, and fitness areas in the same project for one consistent floor.

Open garage with white interior door.
ACI-Certified Foremen
Station Readiness

How We Coat Apparatus Bays Without Slowing a Response

A station never truly closes. These steps keep trucks ready to roll while each bay gets its new floor. Your chief sets the order, and we follow it.

1. Plan With the Chief

We meet with your chief or facilities lead to set which bays close first. Shift changes, training days, and events all go into the plan. Calls come first.

2. Stage the Trucks Outside the Work Zone

Apparatus moves to open bays or nearby parking. Gear racks and turnout gear get covered or moved before any grinding starts. Nothing stays in the way of a call.

3. Coat One Bay Group at a Time

Each bay group gets ground, repaired, and coated while the rest of the station stays ready. Cure times for each group are set before day one, so every shift knows which trucks sit where for the whole project.

4. Return the Bays With Care Steps

Trucks roll back on the planned date. No guesswork. Your crew gets plain care steps for washing apparatus and cleaning up road salt on the new floor.

Striping, Logos, and Department Pride

A station floor is part of the public face of the department. Open house visitors and school groups see the bay first. Our commercial epoxy flooring can carry striping for apparatus parking and walkways. A custom logo can put your patch or shield in the center of the bay.

Why Drews Industries

Why Fire Departments Call Drews for Station Floors

Response readiness comes first, so our floor plan works around your apparatus, shifts, and calls. That respect for how a station runs is why departments call us.

Readiness Built Into the Plan

We never close every bay at once. The station keeps full coverage while one bay group at a time gets its coating. Your response times stay where they should be.

Floors for Gear Rooms and Decon Areas

Gear storage and decon areas need a floor that handles water and constant cleaning. We coat those rooms with the same care as the apparatus bays.

A Crew That Takes Safety Seriously

Our crews hold regular safety meetings, and safety is a core value for us. Firefighters notice a contractor who works clean, keeps exits clear, and stays out of the way when the tones drop.

Station Floor Questions From Fire Departments

Can you coat our bays without taking apparatus out of service?

Yes, we plan the work in phases so apparatus stays ready to respond. Trucks move to another bay or outside while our crew grinds and coats one section. We set the order and the cure time for each section with your chief, so the station keeps full coverage during the whole project.

How much grip does a coated bay floor have after a washdown?

A coated bay floor grips far better than bare, wet concrete. Every commercial system we install has slip resistance built in. We add extra grit at drains, wash zones, and the paths crews run to the cab doors. Smoother texture stays in day rooms and offices, where washdowns do not happen.

Can the department patch go in the center of the apparatus bay?

Yes, patches, shields, apparatus striping, and color zones can all go into the floor. We place them before the clear topcoat, so tires and boots do not wear them away. During the estimate, we map where the logo should sit so it shows clearly with the trucks parked.

Do you coat other municipal buildings besides fire stations?

Yes, our city work covers other busy public buildings too. That includes city garages, public works shops, and maintenance buildings. These floors face the same mix of trucks, salt, fluids, and washing, so we plan them with the same grit, striping, and phased schedules.

How long does a fire station floor coating last?

A well-prepped bay coating can serve for many years under daily truck traffic. The heaviest wear shows first in parking spots and drive lanes. When that happens, a fresh topcoat can renew the surface without starting over from bare concrete. Grinding and patching before coating matter most.

Get a Free Estimate

This field is for validation purposes and should be left unchanged.
Address(Required)
Free Estimates

Give Your Crew a Floor That Keeps Pace

Your firefighters train hard and respond fast, and their floor should hold up its end. We will inspect your bays, talk with your team about daily use, and recommend fire station floor coatings that fit how your station works. Call our Delano office at (763) 972-4010, or see all commercial concrete coatings.