Storefront Floors Across the Twin Cities

Polished Retail Floor Coatings for Delano, MN Stores

Shoppers judge a store in the first few steps through the door. Our decorative and metallic floor coatings look polished, resist winter salt, and add grip near the entrance.

Store Floors That Look Sharp and Clean Fast

Retail floor coatings give a store a polished, jointless surface that resists salt, spills, and cart traffic. A dust mop and a damp mop keep it clean. Unlike tile, they have no grout lines to crack or trap grime.

Picture a customer stepping in from a slushy parking lot on a January afternoon. Before they see one product, they see the floor. Salt rings, cracked tile, or dull concrete say something about the whole store. A bright, clean surface says something better.

Boutiques and larger stores across the metro call our crews. We coat shop floors from downtown Delano to Edina, Woodbury, and Roseville.

  • Metallic, chip, solid color, and quartz finishes
  • Grit at entries for winter footing
  • No floor waxing, stripping, or buffing
  • Phased work to keep the store open
Get a Free Estimate 

Tell us about your store size and hours. We will plan the work so you lose as few sales days as possible.

This field is for validation purposes and should be left unchanged.
Address(Required)
Open garage with a closed interior door.

Fixtures Get Attention, but Floors Set the Tone

Store owners spend real money on lighting, fixtures, and signs. The floor ties all of it together, yet in most stores it is the last thing anyone thinks to update when the budget for a remodel gets set. A coated floor changes that without the seams of tile.

Each finish gives your store a different feel.

  • Metallic floors bring movement and shine for boutiques.
  • Decorative chip floors hide wear between cleanings.
  • Solid color floors give brands a simple, clean backdrop.

Logos and color zones can go right into the surface too. A brand mark near the entrance or a colored path to checkout makes the floor part of your store design.

Store Floors Built for Carts and Foot Traffic

Retail floors take a beating. Carts roll the same paths all day, stockers drag boxes from the back, and fixtures move every season as displays change.

As a retail epoxy flooring system, high-strength epoxy gives the floor a hard body that resists scuffs and impact. Where sunlight pours through front windows, a UV-stable polyaspartic topcoat keeps the color even, so the area near the glass does not fade.

When fixtures move, felt pads under the feet protect the floor finish. Bare metal dragged across any surface leaves scratches over time.

Winter Safety

Grip at the Door With a Non-Slip Coating

The doorway is the riskiest spot in any store from November to April. Snowmelt and salt water spread across the first few feet of floor, and on a smooth surface, that is where slips happen.

A non slip epoxy floor coating cuts much of that risk. We add grit to the topcoat at entries, near restrooms, and along any wet zone. The rest of the sales floor can stay smooth and easy to clean. Sealed concrete coatings also keep salt brine on top, where a mop clears it before closing.

Open garage with gray walls and window.
ACI-Certified Foremen
Store Schedule

How We Coat a Store Around the Sales Calendar

Retail floors need to be done fast and at the right time of year. These steps keep the doors open on your busiest days. Most projects finish without a single lost weekend.

1. Pick a Slow Week

We look at your sales calendar and avoid holiday and back to school rushes. Many stores choose late winter or midsummer, when traffic dips. You choose the week, and we hold it.

2. Work After Closing

Crews can start when the doors lock and leave the floor ready by morning in small sections. Larger stores can close one department at a time.

3. Start at the Entry

The front door takes the most slush and grit. We coat entries with extra traction first, so customers get a safe step inside from the first week.

4. Restock and Reopen

Fixtures and shelving return on the date in your plan. Your manager gets a short care sheet so staff clean the floor the right way from day one.

Metallic Floors That Make the Sales Floor Shine

Our metallic system uses pigments that swirl as the coating levels out, so no two floors look alike. Under good store lighting, it gives the room depth and a premium feel. Many owners put metallic on the sales floor and a simple solid color in the back room to keep the budget focused.

Why Drews Industries

Why Store Owners Hire Drews for Their Floors

A store floor has to look sharp and survive carts, boots, and spilled drinks. Owners choose us for the design range and for straight answers on timing.

Real Finish Choices for Your Brand

Metallic, chip, solid color, and quartz each give a store a different feel. We help you match the floor to your fixtures and lighting, then show options before you commit.

Safer Entries Through Winter

Salt and slush make store entrances slick. We build extra grip into the entry zone, which cuts slip risk for customers when Minnesota weather turns.

No Surprises on Reopening Day

Your plan lists the closing date and the reopening date for each area. Honest updates are a core value for us, so you hear about changes before your staff do.

Straight Talk on Store Floor Coatings

What happens to the vinyl or tile on our store floor?

In most cases, we remove the old vinyl or tile and grind the concrete underneath. Coatings bond best to clean, sound concrete, so glue and old flooring have to come up first. We check what is under your current floor during the estimate, and removal is part of the written price we give you.

Does a shiny store floor mean a slick store floor?

A glossy coating does not have to be slick. We add fine grit to the topcoat at entrances, restrooms, and other wet areas, which gives shoes more grip. Chip finishes already have light texture built in. Dry areas of the sales floor can stay smooth and glossy, so you get shine where it counts.

Can our logo go into the retail floor coating?

Yes, custom logos and color zones become part of the coating system. We place them before the final topcoat, so the clear layer protects them from carts and foot traffic. That is why a built-in logo stays sharp long after a painted or vinyl graphic would have worn away at the entrance.

Is an epoxy floor hard to keep clean in a store?

No, a coated store floor is one of the easiest surfaces to maintain. Daily dust mopping keeps it bright, and a damp mop with a neutral cleaner handles spills and salt. There is no wax to strip, no grout to scrub, and no buffing schedule to book, which saves your staff time.

How long will our store be closed for the coating work?

Closure time depends on the size of the floor and the finish you choose. Some stores close for a short planned stretch, while others coat in phases so part of the sales floor stays open. We confirm cure times during planning, so you know your reopening date before you sign anything.

Get a Free Estimate

This field is for validation purposes and should be left unchanged.
Address(Required)
Free Estimates

Win Over Shoppers Before They Reach a Shelf

Every customer walks across your floor before they reach your products. We will visit the store, check the slab, and help you pick retail floor coatings that fit your brand and stand up to Minnesota winters. Call (763) 972-4010, or see all of our commercial concrete coatings.