High-Strength Floors for Business
Forklifts, pallet jacks, spilled fluids, and long shifts on hard concrete. High-strength epoxy handles that kind of punishment, and we install it across the Twin Cities with grit, striping, and logos where needed.
Epoxy flooring is a two-part resin coating that hardens into a thick, dense layer bonded to ground concrete. It resists impact, oil, and chemicals, which is why warehouses, auto bays, and production floors use it more than any other coating.
Once cured, epoxy shrugs off loads that crush bare slabs. Forklifts included. It also keeps fluids on the surface, so stains never set into the concrete.
Businesses from Delano to the far side of the metro call us for high-strength epoxy flooring. We are a concrete company first, so we start with the slab and build the right system on top.
Tell us what rolls across your floor and what spills on it. We will match the epoxy system to both.
Epoxy comes as two parts, a resin and a hardener. When the parts mix, a chemical reaction turns them into a tough, plastic-like film. That film is much thicker and harder than paint or sealer, which gives it real impact strength.
On top of that epoxy base, we build the details your business needs.
Cleanup gets faster too. Oil, cleaners, and road salt sit on the epoxy instead of soaking in, so a mop or scrubber clears them.
We like to be straight about what each material does well. Epoxy is the workhorse of indoor commercial concrete coatings. It shines in warehouses, auto shops, and production spaces where loads run heavy and chemicals are common.
Sunlight is its weak spot, and in a building with big dock doors or front windows, that weakness shows up as an amber stripe across the floor within a few seasons. Standard epoxy can turn amber under long UV exposure. That is why our home system skips an epoxy top layer. Homes get a polyurea primer, a base coat, and a UV-stable polyaspartic topcoat instead.
In commercial work, we solve the sun problem by finishing the epoxy with a polyaspartic topcoat wherever daylight reaches the floor.
Some food service and industrial spaces need extra assurance. We can install select epoxy floor coating systems that meet FDA-approved standards for those rooms. A continuous sealed floor removes the grout lines and joints where residue builds up.
We review your cleaners, hot water use, and washdown routine first. Then we pick a topcoat that handles your real process, since that choice matters as much as the base.

Epoxy is a two part resin that hardens by chemical reaction, not by drying. That chemistry shapes every step of the install. Timing matters at every stage.
Epoxy needs a dry slab and the right room temperature to cure. We check both during the site visit, because cold or damp slabs slow or block the reaction.
Each batch of resin and hardener has a short working time once mixed. Our crew mixes only what it can spread before the resin starts to set.
Each layer has a window when the next coat bonds best. We time quartz or chip broadcasts and the topcoat inside that window for a strong bond.
Epoxy feels hard within a day but keeps curing for several more. We give each zone a date for foot traffic and a later date for carts and vehicles.
Not every commercial floor needs to look industrial. Solid colors suit warehouses and back rooms. Metallic floors bring movement to showrooms and retail spaces. Quartz adds strength and grip where the work is hardest. See clean single-tone floors from past projects in our gallery.
Upkeep on epoxy is mostly about grit and timing. Sand and salt act like sandpaper under wheels and boots, so a daily sweep does the most good. Clean spills when they happen, before a forklift spreads them down an aisle.
For deeper cleaning, an auto scrubber or a mop with a neutral cleaner works well. Skip harsh solvents and wire brushes. Walk-off mats at the doors catch winter slush before it reaches the floor.
Over time, the busiest lanes show wear first. A fresh topcoat can renew them without starting over from bare concrete.
An epoxy floor is only as good as the concrete it bonds to and the person telling you where it fits. Our advice covers both.
Epoxy can yellow in direct sun. For sunny rooms or outdoor slabs, we steer you to polyaspartic instead of selling the wrong system. That honesty saves owners from early repairs.
Quartz or chips broadcast into the epoxy give wet areas lasting grip. The texture is part of the floor, not a coating that wears away.
Your team gets cleaning steps for the new floor. The right cleaners keep the topcoat glossy and extend the life of the whole system. Harsh cleaners are the most common cause of dull epoxy.
Yes, we install epoxy flooring in warehouses, production floors, and other large spaces across the Twin Cities. Big floors run in phases, so part of the building stays open while one zone cures. Our estimator maps every zone and gives you return-to-service dates before any work begins.
Prep makes the biggest difference. We grind the concrete to open its pores, so the resin soaks in and bonds deep instead of sitting on top. Then we patch cracks and weak spots before they can spread under the coating. A coating rolled onto smooth, dirty concrete will lift, no matter how strong the epoxy is.
Yes, safety striping, color zones, and custom logos can all be part of the epoxy system. We place them before the topcoat, so the clear layer protects them from wear. Warehouses and fire stations use striping to mark lanes, while retail stores and showrooms tend to favor a logo by the front door.
Standard epoxy can turn amber in direct sunlight, so we do not use it as a top layer outdoors. For sunny rooms and outdoor slabs, we finish with a UV-stable polyaspartic topcoat over the base layers. That keeps the hard epoxy body underneath while the surface holds its color in daylight.
Cure time depends on the product, the floor size, and the temperature in the building. Many zones return to light traffic within a day, while heavy equipment waits longer. We confirm exact cure times during planning, so you know when each area returns to service before the first grinder starts.
Every business floor carries its own mix of traffic, spills, and schedules. As an epoxy flooring company that knows concrete from the ground up, we match the system to the work. Call (763) 972-4010, or compare every option on our concrete floor coatings guide.