Kitchens and Dining Rooms Across the Metro

Safe Restaurant Floor Coatings for Delano, MN Kitchens

Kitchen floors take water, grease, and nonstop footsteps from open to close. We install slip-resistant coatings that seal the concrete, steady your crew, and make the nightly mop a shorter job.

Kitchen Floors That Grip, Seal, and Mop Clean

Restaurant floor coatings seal kitchen and dining room concrete under a slip-resistant layer. Grease and water stay on top, and staff keep their footing on busy nights. The sealed floor also has no grout lines, which means fewer places for grime and odors to hide.

Follow a server across the kitchen floor during a Friday rush and count the hazards. A puddle by the dish pit. A smear of oil near the line. Snowmelt tracked in from the alley.

Owners in St. Louis Park, Minnetonka, and Edina call our Delano crews for the same three reasons. They want traction, a floor that cleans fast, and a surface that does not soak up grease.

  • Grit in the topcoat at dish pits and walk-ins
  • Quartz systems for the hardest kitchen zones
  • FDA-approved coating options for food service
  • Floor work scheduled around your covers
Get a Free Estimate 

Tell us your hours and your slowest days. We will plan the kitchen floor around them.

This field is for validation purposes and should be left unchanged.
Address(Required)
Close-up of textured sandy surface

Bare Kitchen Concrete Works Against Your Crew

Unsealed concrete is porous. It drinks up spills. Oil, sauces, and mop water sink in and leave dark stains that never fully lift. Over time, the slab pits around drains and prep stations, and those pits hold food residue.

Old quarry tile has its own troubles in a restaurant kitchen.

  • Grout lines crack and trap grease.
  • Loose tiles catch cart wheels and toes.
  • Gaps in the floor hold moisture and sour smells.

A continuous coating removes the joints where buildup hides. Your staff gets one smooth, sealed floor to clean.

A Non-Slip Epoxy Floor Coating Where Feet Move Fast

Traction is the first thing most restaurant owners ask about when they call, and it should be, since a single fall can cost a cook weeks of work and you a lot more. Every commercial system we install has slip resistance built in, and we add grit to the topcoat in the wettest zones. That means the dish area, the walk-in entry, and the path from the line to the pass.

A non-slip epoxy floor coating does not have to feel like sandpaper. We match the texture to each zone. Dining rooms stay smoother and easier on shoes, while kitchens get more bite underfoot where it counts.

Food Service

Commercial Kitchen Epoxy Flooring Made for Mess

Heat, grease, and harsh cleaners hit a kitchen floor every day. Our commercial kitchen epoxy flooring uses high-strength epoxy and polyaspartic layers that stand up to that abuse. Spills sit on the sealed surface, so a squeegee moves them to the drain.

Kitchen owners can also ask about FDA-approved system options for food service spaces. Walk-in coolers deserve extra care too, since cold air and condensation make those thresholds some of the slickest spots in the building.

Close-up of multicolored confetti background
ACI-Certified Foremen
Kitchen Closure Plan

How We Coat a Restaurant Between Services

Restaurants cannot close for long. Our plan fits the floor work into the gap between your last service and your next one. Your team helps us choose the window that costs the fewest covers.

1. Pick the Closure Window

Some owners close for a few days during a slow week. Others split the work across slow nights. We set the window around reservations and deliveries.

2. Move Equipment and Protect the Line

Movable equipment rolls out, and fixed equipment gets wrapped. Our crew protects prep areas and walk in doors before any grinding starts. Gas and water lines stay untouched.

3. Set Grip by Zone

The cook line, dish area, and walk in coolers get more texture than the dining room. Each zone gets the traction that fits its spills and foot speed.

4. Clean, Restock, Reopen

After the floor cures, equipment returns and your team deep cleans. You reopen on the date in your plan with a floor that mops clean each night.

Quartz Finishes for the Hardest Kitchen Zones

Quartz systems add body, grip, and chemical resistance to a kitchen floor. Colored quartz granules go into the wet coating. They leave a fine texture that holds footing during washdowns without feeling sharp. Many owners use quartz in the kitchen and a decorative chip in the dining room.

Why Drews Industries

Why Kitchens Across the Metro Choose Drews

A restaurant floor has one job above all. It has to keep people upright. Owners pick us because traction and cleaning are where our planning starts.

Traction Matched to Each Room

Cooks need grip on greasy tile lines, while guests want a smooth dining floor. We set texture room by room instead of one finish for the whole building.

A Floor That Mops Clean

A one piece coating has no grout lines to trap grease and food. Staff finish closing cleanup faster, and the floor looks better at inspection time.

Schedules Built Around Service

We plan work around reservations, deliveries, and staff shifts. You know the exact reopening date before you agree to the job. If a delay ever comes up, you hear it from us first.

What Owners Ask Before a Kitchen Floor Coating

Does our quarry tile have to come out before coating?

In most cases, yes, the quarry tile comes up and we coat the concrete below. Coatings bond best to clean, ground concrete, and old grout lines would show through or crack. We inspect your tile and slab during the visit, then explain the removal plan and include it in the written estimate.

How slippery is a coated kitchen floor near the dish pit?

A coated kitchen floor with added grit grips much better than bare concrete or worn tile. Every commercial system starts with slip resistance, and we add extra grit wherever water pools. That covers the dish pit, the walk-in threshold, and the path to the back door. Mats still help where staff stand all shift.

How do we clean a coated restaurant floor each night?

Sweep first, then mop or scrub with your normal cleaning routine. The sealed surface keeps grease on top, so it lifts with less effort than on bare concrete or grout. Squeegee standing water to the drain at close. Avoid wire brushes, which can wear down the grit texture over time.

Do you offer food-safe floor coating options?

Yes, FDA-approved system options exist for food service areas, and we walk you through them at the estimate. We also review your cleaners, hot water use, and inspection routine. That way the topcoat we pick handles your real washdown process for years.

How long will our kitchen be closed for the floor work?

Closure time depends on the room size and the system we install. Some restaurants coat during a planned closure, while others split the work into phases across slow days. We confirm cure times before booking, so you know the exact reopening date and can plan staff, deliveries, and reservations.

Get a Free Estimate

This field is for validation purposes and should be left unchanged.
Address(Required)
Free Estimates

Give Every Kitchen Shift Better Footing

Your staff spends long hours on that floor, and it should help them work safely. We will tour the back of house with you, test the slab, and suggest restaurant floor coatings that match how your line moves. Call (763) 972-4010, or see all of our commercial concrete coatings.