Pool Decks Across the West Metro

Barefoot-Friendly Pool Deck Coatings Near Delano, MN

A pool deck has two jobs. It needs to look inviting, and it needs to hold wet feet steady. Our coatings handle both, with outdoor chips for texture and a topcoat made for Minnesota sun and frost.

Pool Deck Coatings That Grip Wet Feet

Pool deck coatings add a textured, slip-resistant surface to the concrete around your pool. They also seal the deck against splash-out, chemicals, and winter freeze damage. The right system uses outdoor chips and a UV-stable topcoat, so the color holds up in full sun.

Picture two pool decks on the same street. The first is bare concrete that is chalky, faded, and lifted at one corner. The second has a soft gray chip finish. Water beads on top, and kids run to the steps without a second thought.

Both decks started as the same kind of concrete slab, poured by similar crews in similar years. Our crews coat home pool decks across the West Metro. Rockford, Maple Plain, Minnetonka, and Eden Prairie are all on the route.

  • Deck texture tuned for bare feet, not too rough
  • UV Collection chips made for outdoor sun
  • Resists pool chemicals and splash-out
  • Walk on the deck in about a day
Get a Free Estimate 

Tell us the size of your deck and when the pool opens. We will plan dates around your swim season.

This field is for validation purposes and should be left unchanged.
Address(Required)
Close-up of decorative chip texture on a coated floor

Grip Where Wet Feet Land on the Pool Deck

Safety is the first reason most pool owners call us, and families with young swimmers top that list. Add splash water, sunscreen, and a few pool toys, and bare concrete turns slick fast. A coated deck with chips gives feet something to hold. Kids notice.

We pay extra attention to the deck spots where people move fast.

  • The concrete path from the back door to the water
  • The area around the pool steps and ladder
  • The deck zone below the diving board

Too little texture feels slick under wet feet, while too much scratches bare skin and catches pool toys. Chip size and spread let us land between the two, and we bring samples so you can feel the difference by hand.

Coatings That Ride Out a Frozen Pool Deck

Minnesota pools open for a few short months, but the deck sits outside all year, through every thaw, every ice storm, and every snow shovel that scrapes across it. It bakes in July and freezes solid in January. Water that soaks into bare concrete during swim season turns to ice later and breaks the surface apart a little at a time.

Every one of our pool deck coatings for concrete starts with a polyurea primer on the ground slab. A base coat and hand-broadcast outdoor chips follow that primer. A clear polyaspartic topcoat seals it all and moves with the deck through heat and cold.

Some owners ask for an epoxy pool deck by name. Standard epoxy flooring works well indoors, but it can yellow in strong sun. That is why our outdoor concrete coatings always finish with a polyaspartic layer.

Repair or Replace

Pool Deck Resurfacing or a New Slab

Every deck we look at falls into one of three groups. Some are sound and only need grinding and coating. Others have cracks and pits that we fill before coating. A few have sunk or broken badly enough that patching would only hide the problem.

For the first two groups, pool deck resurfacing with a coating is the right call. For the third, our flatwork crew can pour a new deck with a 4500 PSI mix and 6 percent air, which suits freeze and thaw.

Hot asphalt being leveled during road construction with heavy machinery and workers in safety gear.
Lifetime Warranty
Swim Season Planning

How We Get a Pool Deck Ready Before Swim Season

Pool decks have a short window between frost and the first swim. Good timing and the right traction plan decide how the deck feels all summer.

1. Book Early in the Spring

Pool decks fill our calendar fast once the snow melts. Booking in March or April gives us time to finish before Memorial Day and lets the coating cure before the pool opens.

2. Map Traction Around the Pool

The coping edge, steps, and ladder zones need the most grip. Lounge areas can have a smoother feel. Comfort matters there. We set the texture for each zone before any coating goes down.

3. Repair Frost Damage and Old Cracks

Winter freeze opens cracks and lifts deck sections near the water. We fill cracks and grind high edges flat, so bare feet never catch a lip on the finished deck.

4. Pick a Color That Stays Cooler

Lighter blends reflect more sun and feel better under bare feet in July. We show outdoor chip options in daylight, so you see how each one looks beside the water.

Pool Deck Colors That Stay Cooler and Look Right

We make every chip in our UV Collection for outdoor exposure. Pale chips reflect more sunlight, which keeps the deck gentler on bare feet during a heat wave. Blends like Chalet, Bungalow, and Villa pair well with light siding and white coping.

Why Drews Industries

Why Pool Owners Hand Their Decks to Drews

A pool deck has to be safe for wet feet and still look good beside the water. Our crews plan for both, from the first crack repair at the deep end to the final textured topcoat around the steps and coping.

Grip Set Where Feet Actually Slip

Traction is not one setting for the whole deck. We add more texture at the steps and coping and keep lounge zones comfortable for towels and bare feet.

An Honest Call on Old Decks

Some decks are worth coating, and some have heaved too far. We tell you which, and our flatwork crew can pour a new deck when replacement is the better value.

Outdoor Systems Only

Pool chemicals, sun, and frost break down indoor products fast. Your deck gets UV stable chips and a polyaspartic topcoat chosen for outdoor water exposure.

Pool Season Questions About Deck Coatings

Will pool chemicals damage a coated pool deck?

No, our topcoat resists pool chemicals, splash-out, and sunscreen spills. Chlorine water that sits on the deck stays on the surface instead of soaking into the concrete. Rinsing the deck with a hose every week or two during swim season keeps it looking fresh and stops chemical residue from drying into a white film.

When is the best time to coat a pool deck in Minnesota?

Early spring is the best time, before the pool opens and before lead times grow. Fall works well too, and it protects the deck before the first freeze. We need dry concrete and mild temperatures, so we avoid the coldest months. Calling in March or April gives you the widest choice of dates.

Can you match the new pool deck to an existing patio?

In most cases, yes. We bring UV Collection samples to your home and lay them next to the patio, coping, and siding. That lets you pick a blend that ties the deck and patio together. If the patio is bare concrete, many owners coat both slabs at once for one look.

What if the pool deck has a big crack along the edge?

We check every crack during the free estimate. We patch small, stable cracks during prep, and the coating covers them. Large or shifting cracks near the coping may call for new concrete in that section. We explain the reason before we quote, so you know what you are paying for.

How slippery is a coated pool deck when wet?

A chip-coated deck is far less slippery than smooth concrete, because the chips leave a light texture under the topcoat. We tune chip size and spread to grip wet feet without scraping skin. You can feel the samples by hand during the estimate. Running near any pool still carries risk, of course.

Get a Free Estimate

This field is for validation purposes and should be left unchanged.
Address(Required)
Free Estimates

Get the Deck Ready Before the First Swim

A safer, better-looking deck starts with a visit to your backyard. We will measure the deck, check its condition, and walk you through pool deck coatings with samples in hand. Call our Delano office at (763) 972-4010, or see every home option on our residential concrete coatings page.